Part Number Hot Search : 
AK2330 BZT52C18 TE156 NLX1G332 RT7275 BU7421SG MC1121 82077AA
Product Description
Full Text Search
 

To Download EXB50 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 EXB50 Series
DC-DC CONVERTERS
Single output
1
20-50 W High Efficiency DC-DC Converters
* High efficiency topology, 91% typical on EXB50-48S05J * Industry standard footprint * Wide operating temperature -40 C to +70 C (natural convection) * 60% to 110% output trim * No minimum load * Overvoltage and overtemperature protection * Remote sense compensation * Remote ON/OFF * Available RoHS compliant
The EXB50 series of 50 Watt single-output isolated dc-dc converters are specifically designed to meet the power needs of low-voltage silicon. Housed in an open-frame package with an industry-standard footprint, these latest-generation converters offer efficiencies as high as 91%. The series comprises three 24 V input models with 5 V, 3.3 V and 2 V outputs, and six 48 V input models with 12 V, 5 V, 3.3 V 2.5 V, 2 V and 1.8 V outputs. All models feature a wide input range, trimmable output voltage and a 10 A current rating (except the 12 V). Remote sense and remote ON/OFF facilities are included as standard, and the converters are comprehensively protected against overcurrent, overvoltage and overtemperature conditions.
All specifications are typical at nominal input, full load at 25 C unless otherwise stated
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS Voltage adjustability Setpoint accuracy Line regulation Load regulation Total error band Minimum load Overshoot Undershoot Ripple and noise (See Note 1) Transient response (See Notes 2 and 8) 5 Hz to 20 MHz 24 V models 48 V models At turn-on and turn-off Low line to high line Full load to min. load 60% to 110% 1.5% max. 0.1% max. 0.2% max. 3.0% 0% None None 100 mV pk-pk 20 mV rms 3.0% peak deviation 2.0% peak deviation, 200 s recovery to within total error band 10% o/p voltage change
INPUT SPECIFICATIONS Continued Undervoltage lockout 24 24 48 48 V V V V Power Power Power Power up down up down 17 V max. 15 V min. 33.2 V max. 30.9 V min. 30 ms 25 ms
Start-up time (See Note 7)
Power up Remote ON/OFF
EMC CHARACTERISTICS Conducted emissions Radiated emissions Immunity: ESD air ESD contact Radiated field enclosure Conducted (DC power) Conducted (signal) EN55022 (See Note 3) Level A EN55022 (See Note 3) Level B EN55022 Level A (See Note 13) EN61000-4-2 8 kV (NP), 15 kV (RP) EN61000-4-2 6 kV (NP), 8 kV (RP) EN61000-4-3 10 V/m (NP) EN61000-4-6 10 V (NP) EN61000-4-6 10 V (NP)
GENERAL SPECIFICATIONS Efficiency Basic insulation Switching frequency Input/output Fixed See table 1500 Vdc 300 kHz typ. IEC60950/EN60950, UL/cUL1950 CSA C22.2 No. 950 UL94V-0 50 g (1.77 oz) MIL-HDBK-217F @ 25 C 100% load ground benign 270,000 hours
Remote sense INPUT SPECIFICATIONS Input voltage range (See Note 14) Input current
(See Note 9)
24 V nominal 48 V nominal 100 V 100 ms transient 24 24 48 48 V no load V Remote OFF V no load V Remote OFF
18-36 Vdc 36-75 Vdc 85 mA max. 20 mA max. 60 mA max. 10 mA max.
Approvals and standards (See Note 5) Material flammability Weight MTBF
Input current (max.) (See Note 4)
24 V models 48 V models
3.25 A max. @ Io max. and Vin = 18-36 Vdc 1.7 A max. @ lo max. and Vin = 36-75 Vdc 20 mA (pk-pk) typ. 50 mA (pk-pk) typ.
ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Notes 11, 12) ETS 300 019-2-3 Altitude (See Note 10) Operating ambient. -40 C to +70 C temperature (natural convection) Non-operating -55 C to +125 C Classes T3.1 to T3.5 3,000 metres 10,000 metres Derate max. output current by 20% Derate max. output current by 50%
Input reflected ripple (See Note 6) Remote ON/OFF Logic compatibility ON OFF
24 V models 48 V models
(See Note 15) Open collector ref to -input Open circuit or >2 Vdc <1.2 Vdc
File Name: EXB50s.pdf Rev (02): 05 Dec 2005
EXB50 Series
DC-DC CONVERTERS
OUTPUT POWER (MAX.) 20 W 33 W 50 W 18 W 20 W 25 W 33 W 50 W 50 W INPUT VOLTAGE 18-36 Vdc 18-36 Vdc 18-36 Vdc 36-75 Vdc 36-75 Vdc 36-75 Vdc 36-75 Vdc 36-75 Vdc 36-75 Vdc OVP 2.4 Vdc 3.9 Vdc 6 Vdc 2.15 Vdc 2.45 Vdc 2.95 Vdc 4 Vdc 6.15 Vdc 14.2 Vdc OUTPUT VOLTAGE 2V 3.3 V 5V 1.8 V 2V 2.5 V 3.3 V 5V 12 V
Single output
2
20-50 W High Efficiency DC-DC Converters
For the most current data and application support visit www.artesyn.com/html/products.html
OUTPUT CURRENT (MIN.) 0A 0A 0A 0A 0A 0A 0A 0A 0A OUTPUT CURRENT (MAX.) 10 A 10 A 10 A 10 A 10 A 10 A 10 A 10 A 4.2 A
EFFICIENCY (TYP.) 86.5% 89.0% 90.0% 85.7% 87.5% 87.5% 90.0% 91.0% 90.0%
REGULATION LINE 0.1% 0.1% 0.1% 0.1% 0.1% 0.1% 0.1% 0.1% 0.1% LOAD 0.2% 0.2% 0.2% 0.2% 0.2% 0.2% 0.2% 0.2% 0.2%
MODEL NUMBER (16,17) EXB50-24S2V0J EXB50-24S3V3J(14) EXB50-24S05J EXB50-48S1V8J(15) EXB50-48S2V0J(15) EXB50-48S2V5J(15) EXB50-48S3V3J(14,15) EXB50-48S05J(15) EXB50-48S12J(15)
Notes
Measured as per recommended set-up. 150 mV pk-pk for EXB5048S12J. 2 di/dt = 0.1 A/s, Vin = 24/48 Vdc, Tc = 25 C, load change = 0.5 lo max. to 0.75 lo max. and 0.75 lo max. to 0.5 lo max. 3 The EXB50 meets level A and level B conducted emissions only with external components connected before the input pins to the converter. 4 Recommended input fusing is a 6.3 A HRC 200 V rated fuse on the 24 V and 3.15 A HRC 200 V rated fuse on the 48 V. 5 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 6 Simulated source impedance of 12 H. 12 H inductor in series with +Vin. 7 Start-up into resistive load. 8 EXB50-24S2V0J model has 5.0% max. deviation and 300 s recovery. 9 Maximum output deviation is 10% inclusive of trim. 10 Contact factory for operation at higher altitude. 11 See Application Note 113 for derating curves. CAUTION: Hazardous internal voltages and high temperatures. Ensure that unit is not user accessible. 1
Notes Continued
12 Wide operating temperature on the EXB50-24S05J is -40 C to +60 C. 13 Input transient (48 V) ETS300 132-2 ETR283. 14 100 V, 100 ms transient applies to the EXB50-24S3V3J and the EXB5048S3V3J models. Please add the suffix 'R03' to the model number e.g. EXB50-48S3V3R03J. This is also active low remote ON/OFF. 15 Active low remote ON/OFF available. Please add suffix '-R' to model number e.g. EXB50-48S3V3-RJ. 16 The `J' suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 17 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative.
PROTECTION Short-circuit Over-voltage Thermal TELECOM SPECIFICATION Central office interface A ETS300-132-2, input voltage and current requirements Continuous Non-latching clamp 120 C hot spot temperature with automatic recovery
EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below.
+ Sense
TRIM UP
Trim
TRIM DOWN
- Sense
RT1 or RT2
International Safety Standard Approvals
UL/cUL CAN/CSA 22.2 No. 60950-00 : UL 60950 File No. E174104 TUV Product Service. Certificate No. B 03 08 38572 036
File Name: EXB50s.pdf Rev (02): 05 Dec 2005
EXB50 Series
DC-DC CONVERTERS
0.430.02 (10.900.5)
Single output
3
20-50 W High Efficiency DC-DC Converters
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
0.1380.02 (3.500.5)
0.02 (0.50)
O0.040 0.02
(O1.02 0.05)
O0.0790.002
(O2.030.05) 0.20 (5.08) 0.50 (12.70) STAND-OFFS 4 PLACES
0.160.02 (4.100.5) 9 8 0.40 (10.16)
OPEN-FRAME HEIGHT
1 1.00 (25.40)
0.70 (17.78)
1.00 (25.40)
3 4
BOTTOM VIEW
7 6 5
1.90 (48.26) 2.28 0.02 (57.91 0.5)
ALL DIMENSIONS IN INCHES (mm)
0.19 (4.83)
General Tolerance 0.010 (0.25) Unless Otherwise Specified
PIN CONNECTIONS PIN NUMBER 1 2 3 4 5 6 7 8 9 FUNCTION -Vin No Pin Remote ON/OFF +Vin +Vout +Sense Trim -Sense -Vout
Datasheet (c) Artesyn Technologies(R) 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
Please consult our website for the following items: Application Note Longform Datasheet
2.40 0.02 (60.96 0.5)
2.00 (50.80)
1.40 (35.56)
1.40 (35.56)
www.artesyn.com
File Name: EXB50s.pdf Rev (02): 05 Dec 2005


▲Up To Search▲   

 
Price & Availability of EXB50

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X